(224) 344-2333ENG / RU Pingree Grove, IL1360 S BELL CT
EN
Guide · November 22, 2026

Used semi truck inspection checklist

A used semi truck can be a great buy or an expensive mistake. Go through this checklist before you pay, whether you buy from a dealer, a fleet or a private seller.

Take this list with you, or open it on your phone at the lot. If you are not sure about something, ask a mechanic you trust to look at the truck with you. A few hundred dollars for an inspection is nothing next to an engine or aftertreatment repair.

1. Paperwork and VIN

  • The VIN on the title matches the VIN on the truck (door jamb and frame).
  • The title is clean, and you know who holds it. If a bank still holds it, ask how the loan is paid off at the sale.
  • Maintenance (PM) records: oil changes, major repairs, and when the aftertreatment was last cleaned or replaced.
  • The last annual DOT inspection. Every truck in interstate service must pass one every 12 months.
  • Warranty: is there factory engine coverage left, until what date or mileage, and can it be transferred to you?

2. Engine and aftertreatment

  • Start the engine cold if you can. Listen for knocks, watch for heavy smoke, and check that it idles smoothly.
  • Look for oil, coolant and fuel leaks around the engine, turbo and radiator.
  • Check the dash for warning lights, and ask for a scan of active and past fault codes.
  • Ask about the DPF, DEF and SCR system. Frequent regenerations, derate history or DEF warnings can mean a costly repair is coming.
  • Compare miles with engine hours. A lot of hours on low miles means a lot of idling.

3. Transmission and driveline

  • Test drive it loaded or at least at highway speed. Shifts should be smooth, with no slipping or grinding.
  • Check the clutch, the U-joints and the differentials for leaks and noise.

4. Tires, wheels and brakes

  • Federal rules ask for at least 4/32 inch of tread on steer tires and 2/32 inch on the others. Less than that means new tires right away.
  • Look for uneven wear. It can point to alignment or suspension problems.
  • Check wheel seals for leaks, brake drums and shoes or pads, slack adjusters, and listen for air leaks with the brakes applied.
  • The air system should build pressure quickly and hold it.

5. Frame, suspension and fifth wheel

  • Look under the truck for cracks, welds, heavy rust or bent parts on the frame rails.
  • Check air bags, shocks and springs, and that the truck sits level.
  • The fifth wheel locks and releases properly and is greased.

6. Cab, sleeper and electrical

  • Heat and A/C in the cab and the sleeper, and the APU if the truck has one.
  • All lights, mirrors, wipers, gauges and the ELD or its mount.
  • Seats, bunk, windows and door seals. Water stains can mean a leak.

Questions to ask the seller

  1. Where did the truck come from, a fleet or one owner?
  2. What was done to it before it went up for sale?
  3. Can I see the PM records and the last DOT inspection?
  4. Is there any warranty left, and what does it cover?
  5. Can my mechanic inspect it before I pay?

How Titan prepares every truck

Every truck at Titan Truck Sales goes through our own shop before it is listed: DOT inspection, complete service with oil, filters and fluids, worn parts replaced, all systems checked and full detailing. PM records come with the truck. Many of our trucks still have factory engine warranty, and each truck page shows the warranty and the date it ends.

You are welcome to come to our lot at 1360 S Bell Ct, Pingree Grove, IL and see the truck in person. Call or text (224) 344-2333 before you come, and we will have it ready. Paying with bad credit? Read how to buy a semi truck with bad credit.

Looking for a truck?Late-model sleepers with prices and monthly payments on every truck. In-house financing with no credit check.

More guides

Call Text Telegram Payment